Step by Step
(New Tape Splice
- with Panasonic Smart Splice Detection
Tape with splice shim arrow on the right
allows Panasonic machine to detect black splice on assorted Panasonic
equipment. Splice has perforation on black tape to allow small
slit of black tape to cover sprocket drive holes for splice detection.
- 8mm order no. 8STSS-220608AR
- 12mm order no. 12STSS-260612AR
- 16mm order no. 16STSS-280616AR
TAPE EXTENDERS OR LEADER TAPE TAPE EXTENDERS: Our most popular product
right now with our customers. One of the biggest problems is the waste
of components on a reel that don't have a leader at the beginning of
the SMD reel. The Tape Extenders are used for the partial reels that
don't have a leader. The Tape Extender adds an additional 500mm of tape
as a leader. They feed into your SMT feeder as a piece of covertape.
The Tape Extenders reduce the loss of components when you have no
leader tape to work with. When your order is for 200 boards from your
contract manufacturer, you can provide them with 200 components on each
reel and ONLY 200. Our customers tell us that it is not that the
components are so expensive, it's just that when the customer sends 200
components on a reel without a leader, the first few components are
wasted on the pick and place machine for starting the feeder. With the
Tape Extenders, you have no waste. You can receive the partial reels
with a Tape Extender and feed the machine without any waste. The Tape
Splicer Kit comes with a box of assorted Tape Extenders for 8mm, 12mm,
16mm, 24m and 32-44mm Carrier Tapes.
Universal Tape Splicer Steps
Cut the ends of the SMD Carrier Tapes in
the center of the Sprocket Drive Hole OR the Center of the pocket on
the Carrier Tapes. (Carrier Tape alignment tool is also available
for greater accuracy in splicing with the Tape Splicer Tool.
● Place the Brass shim in the Tape Splicer Tool with the
teeth on the brass splice shim facing up.
● Place the Leader tape of the New Reel onto the Tape Splicer in
the center of the splicing shim, then place the trailing end of the
carrier tape to be changed centered on the splicing shim on the Tape
● Rotate the Carrier Tape Hold down clamps on the Tape Splicer to
hold down the carrier tape. (The Tape Splicer Hold down clamps
allows you to keep one hand free while crimping with the Tape Splicer
● Crimp the Tape Splicer Tool. Release Tape Splicer handle
and the splice is made on the bottom of the carrier Tape.
● Place SMD Tape Connector centered on
covertapes and the Splice is complete. Remove the joined carrier
tape from the Tape Splice Tool and feed into the pick and place machine
without line shut down.
our splice tape for SMT, which guarantee perfect and reliable
joints in punched carrier tapes without shutting off to machine.
us a call at: 800.608.8273 OR