SMD Carrier cutting tool
Carrier Tape alignment tool is for
greater accuracy in splicing with the Tape Splicer Tool.
This Carrier Tape cutting tool cuts the carrier tape for accurate
alignment during splicing.
order-no. CT-51304
smd carrier tape cutting tool
How to Use Carrier Tape Cutting
Tool CT-51304 Tape.
The Tape Splicing Tool is used for attaching the end of a
depleted reel of components to the beginning of a new reel without
stopping the pick and place machine.
The SMD Carrier Tape Cutting Tool is specially designed for
precise cuttng of SMD Carrier Tapes prior to splicing. The CT-51304 has alignment pins for cutting through the center
of the sprocket hole on the carrier. The
SMD Carrier Tape Cutting Tool cuts the carrier between the
holes. The is
designed to cut all sizes of carrier from 8mm to 56mm wide. The CT-51304 is not included with
the tape splicer kit.
The Carrier Tape Cutting Tool may
be purchased optionally.
To begin the splicing procedure,
first remove protective liners from both ends of the Slicing Tape.
www.tapesplice.com
Place Splicing Tape in CT-51304
Cutting Tool with closed circles over the pins.
www.tapesplice.com 3
Loosen the cover
tape by lifting it with a knife about 1/8-inch (3mm) from beginning of
the New reel. Place the carrier tape over the
pins on the Cutting Tool. www.tapesplice.com
Place end of OLD reel over the pins, to make a near seamless
joint. www.tapesplice.com
The Splicing procedure is now completed. Remove the joined carrier tape
from the CT-51304 Splicing
Tool and feed into pick and place machine without line shut-down. www.tapesplice.com
SMD Carrier Tape Cutting
Tool Cuts SMD tape up
to 56mm www.tapesplice.com. The CT-51304
manual tape splicer joins together
all sizes of SMD carrier tape. Use
during pick & place assembly to splice the end of a depleted reel
to the beginning of a fresh reel of components without line shutdown.
Fits all tape widths without tooling changes. Joins 8, 12, 16, 24, 32
& 44mm tape. Splices plastic, paper, or metal carrier tape.
Completely portable. Hand-held.
CT-51304 SMD Splicing Tool.
Order No.Description
SMD TAPE SPLICING TOOL PREVENTS LINE SHUTDOWN
- Unique Slip-n-Snip
design
perfect for trimming carrier tapes.
- order-no. CT-51303
|
