|
Polyimide Film Masking Tape
9322.69 Polyimide Film Masking Tape 2-mil
Description: A 2-mil polyimide film with a silicone
pressure sensitive adhesive system.
Suggested end use: Engineered to protect gold fingers
during the wave solder process.
Roll width (inches): 1 Roll length (yards): 36
Backing: Polyimide Film Backing thickness: 2.0
Adhesive type: Silicone Adhesive thickness: 1.5
Total thickness: 3.5 Color: Amber
To order use product number 9322.69
|
 |
| |
|
 |
9321.70 Polyimide
Film Masking Tape 1-mil
Description: A 1-mil polyimide film with a silicone
pressure sensitive adhesive system.
Suggested end use: Engineered to protect gold fingers
during the wave solder process.
Roll width (inches): 1 Roll length (yards): 36
Backing: Polyimide Film Backing thickness: 1.0
Adhesive type: Silicone Adhesive thickness: 1.5
Total thickness: 2.5 Color: Amber
Available in 1/4, 3/8, 1/2, 3/4, 1
inch widths.
To order use product number 9321.70 |
| |
|
Highest
temperature tape.
►
Recommended for circuit
boards and splicing wires.
►
Polyimide film with
silicone adhesive for easy release.
►
UL 510 flame retardant.
►
This tape is ideal for
environment where static discharge is a concern.
►
Kapton tape is cut to
specific size for masking in Electrical and thermal insulation
applications, in particular for the masking of Gold fingers on
circuit boards during wave soldering.
►
Polyimide film with heat
resistant silicone adhesive to withstand temperature up to
500°F.
►
Protects flat surface areas
during wave solder with low static charge generation. Length
is 36 yards.
Available in 1/4, 3/8, 1/2, 3/4, 1 inch
widths.
|
 |
KAPTON TAPE - Regular
A high temperature resistant tape (up to 600 Degrees F). Safely
protects gold fingers and other flat surfaces over molten solder.
A 2-mil
polyimide film with a silicone pressure sensitive adhesive system.
Backing thickness (mils): 2.0
Adhesive thickness (mils): 1.5
Total thickness (mils): 3.5
Tensile Strength (lbs./in.): 65
Adhesion to steel (oz./in.): 20
Elongation (%): 60
Standard roll width (inches): 1
Standard roll length (yards): 36
Backing: Polyimide Film
Adhesive type: Silicone
Color:
Amber
A
1-mil polyimide film with a silicone pressure sensitive adhesive
system.
Backing thickness (mils): 1.0
Adhesive thickness (mils): 1.5
Total thickness (mils): 2.5
Tensile Strength (lbs./in.): 35
Adhesion to steel (oz./in.): 20
Elongation (%): 50
Standard roll width (inches): 1
Standard roll length (yards): 36
Backing: Polyimide Film
Adhesive type: Silicone
Color: Amber
|