SMD Double Splice
for 8 mm belts
size: 22 x40 mm
finish: yellow, one side self adhesive
box of 500 pieces
Double Splice Tapes
guarantee perfect and reliable joints in 8 mm punched SMD tapes.
Joining is accomplished without any tools or fixtures, with precise
pitch spacing, using convenient, pre-cut lengths of tape. SMD Double
Splice Tape is supplied in short lengths, ready for use. After peeling
off the upper tape, the raised dots of the clear plastic carrier engage
with the sprocket holes and align the SMD tape ends perfectly with each
other and the joining tape. The first adhesive tape then joins the SMD
cover tape ends. The perforated center line of the carrier, which is
later discarded, helps in folding the connector around the component
tape providing further alignment and joining from the other side.