Cover
Tape Extender
for 24 mm
belts
size: 18 x 500 mm (approx 20 inches)
boxes of 250 pieces
order-no.
TE24 - 3.2518
Cover
Tape Extender
for 32 and
44 mm belts
size: 24 x 500mm (approx 20 inches)
boxes of 250 pieces
order-no.
TE3244 - 3.2524
Just
remove the brown liner ●
Place sticky side on the partial reels cover tape
●Feed
into your SMD Feeder a longer piece of cover tape
- TAPE EXTENDERS:
Our
most popular product right now with our customers. One of
the biggest problems is the waste of components on a reel
that don't have a leader at the beginning of the SMD reel.
The Tape Extenders are used for the partial reels that
don't have a leader. The Tape Extender adds an additional
500mm of tape as a leader. They feed into your SMT feeder
as a piece of covertape. The Tape Extenders reduce the
loss of components when you have no leader tape to work
with.
When your order is for 200
boards from your contract manufacturer, you can provide them
with 200 components on each reel and ONLY 200. Our customers
tell us that it is not that the components are so expensive,
it's just that when the customer sends 200 components on a
reel without a leader, the first few components are wasted
on the pick and place machine for starting the feeder. With
the Tape Extenders, you have no waste. You can receive the
partial reels with a Tape Extender and feed the machine
without any waste. The Tape Splicer Kit comes with a box of
assorted Tape Extenders for 8mm, 12mm, 16mm, 24m and 32-44mm
Carrier Tapes.
